|
Quick Release Speed Ring Conversion
Convert your Speed Ring to a Quick Release Speed Ring
You can convert most of the older Chimera Speed Rings to a Quick Release Ring by fitting a new Quick Release Outer Ring onto your existing inner insert. Measure your inner insert diameter and order from chart below. Most older Speed Rings with eight bolts holding the insert are capable for this conversion.
Your Inner Insert
Approx. Diameter
5.5/8”
7"
|
Quick Release Outer Ring
(with replacement washers)
#2430
#2435
|
Also, you can look up your brand of light and its diameter on the Quick Release Speed Ring Specs page on this web site.
| 
